PAT Testing Labels

PASS LABELS Small Pass Labels LAB1 Paper labels suitable for plug tops and use on small appliances. Rolls of 500 (30 x 20mm) Order Code: MARLAB1 £12.50 Pass Labels Poly1 These are higher quality pass labels made of polyester for harsh environments, or if subject to frequent cleaning and abrasion. Rolls of 500 (50 x 25mm) Order Code: MARPOLY1 £27.00 Pass Labels LAB2 Paper pass safety test labels are designed to be replaced with each inspection. Rolls of 500 (60 x 30mm) Order Code: MARLAB2 £13.50 Microwave Test Labels MARMICRO Labels are produced on high quality polyester and are very durable. Rolls of 500 (50 x 25mm) Order Code: MARMICRO £35.00

APPLIANCE LABELS Appliance labels MARBAR1 Bar code labels identify appliances with a unique number and corresponding bar code. Labels are produced on high quality polyester and are very durable. They withstand environments where ordinary paper labels would be unsuitable, e.g. on kettles, in kitchens, in greasy or dirty environments and on office items where their extra resistance to cleaning materials is a benefit. Separate appliance no. labels should be permanently attached to appliances whereas the pass test label is replaced after each test. Configured to Code 39 for compatibility with current PAT Testers. Rolls of 500 (50 x 25mm) Order Code: MARBAR1 £35.00. Pass Appliance labels MARBAR2 Appliance Pass Labels MARBAR2. Combined barcode and pass label can be fitted directly to the appliance. On retest a new MARPOLY1 label is applied over the old test information on the bottom half of the label. Material is silver polyester. Configured to Code 39. Rolls of 500 (52 x 52mm) Order Code: MARBAR2 £40.00

MARK & SEAL LABELS For extra protection of your data, these labels allow you to write test details on them and then seal the information in by sticking down the transparent flap. This provides a very high degree of protection against abrasion, dirt and erosion from cleaning fluids, etc. Rolls of 500 (60 x 30mm) Order Code: MARMS1 £50.00

FAIL LABELS     These fail labels are essential to prevent re-use of unsafe equipment which has failed a PAT test. Rolls of 100 (60 x 30mm) Order Code: MARFAIL1 £5.00