- Information
- Key spec
- Comparison
- Accessories
The TEK100 is suitable for detecting 100V to 600V AC without requiring physical contact with the conductor.
The presence of any voltage between 100V and 600V AC will generate an audible tone, together with a red visual indication.
The integral self–test activates the sensor in the tip of the tester at 50Hz as well as checking the battery and LED. The entire circuit, not just the indicator LED, is therefore tested.
Non-contact voltage detection
Visual & audible indication
Integral self-test
Voltage range:
100V to 600V AC
Frequency range:
45Hz to 1kHz
Temperature;
-5°C to 40°C
Features:
Integrated self test
Sensitivity:
Typical sensing distances at 230V, 50Hz for different cable types Flat 1mm2 twin & earth – 23mm Flat 2.5mm2 twin & earth – 23mm Round 1.5mm2 – 18mm
Voltage Indication:
AC Voltage present – Red LED and audible tone Battery OK – Green LED
Supply:
9V, PP3 alkaline battery IEC 6LR61, NEDA 1604A (included)
Weight:
130g (incl battery)
Dimensions:
235 x 45 x 35mm
Warranty
2 Years
Full product specification can be found in the product manual or by contacting our team here
EAN: 5036162183164
Ensuring Electrical Safety at Work
Take a look at our comprehensive range of Safe Isolation products and accessories.
View catalogueSafe Isolation saves lives
Check out our products and resources to enable safe working procedures when working with electrical systems. The comprehensive range includes lock-off devices, proving units and voltage indicators, helping you comply with the Electricity at Work Regulations.
Learn moreThink safety, think proving dead, think Martindale
Safe electrical working requires the use of a voltage indicator that has been proven with a proving device. The widest range of proving units available on the market, for use with 230V, 440V and 690V voltage indicators. Check out the full range.
Learn more
Added to basket
Technical support
If you have questions related to Martindale products, please check our FAQ sections on our product pages, where the most common enquiries are answered.
Should you require further help please do not hesitate to contact the Martindale support team using the telephone number or email address below or complete the online form.
"*" indicates required fields