 |
 |
|
|
|
|
|
|
|
|
| Home | Products | Hints,Tips & FAQs | Calibration | Instruction Manuals | Technical Specs | Contact Us | News | ||
 |
|||||||||
| ELITE PROFESSIONAL FUSE FINDER - FD650 - £99.00 |
The Elite Fuse Finder kit brings microprocessor controlled multi-level sensitivity to fuse and breaker identification. Supplied in a robust case complete with transmitter (FD600/T) and receiver (FD650/R) it can operate with either the 13A plug top lead for sockets, or the TL83 lead for light fittings or other points without sockets. This allows tracing from socket to fuse or location to location.
A 6 segment bargraph gives progressive indication of signal strength allowing even faster identification.
Two modes are available:
Automatic mode: which has a memory and auto adjusting for sensitivity for foolproof identification.
Manual mode: which allows very rapid fuse finding using the bargraph.
• Microprocessor Controlled
• Manual and Auto Modes
• 6 Segment Bargraph
• Non Contact Voltage Indicator
FD650 Technical Specification
Instruction Manual
| ELITE STANDARD FUSE FINDER KIT - FD550 - £59.65 |
Also available is the FD550 which includes the new Elite receiver unit with the standard FD500/T UK 3 pin transmitter for use at mains sockets only.
Instruction Manual
| ELITE RECEIVER UPGRADE - FD650R - £48.50 |
Upgrade from the Standard Fuse Finder kits to the Elite kit.
| STANDARD FUSE FINDER KIT - FD500 - £49.65 |
The Martindale Fuse Finder Kit (FD500) allows you find which fuse or breaker controls a circuit. You can also trace from socket to socket on a circuit. The transmitter (FD500/T) takes its power from the mains and emits a signal which the adjustable sensitivity receiver (FD500/R) can pick up.
This combination can easily distinguish the appropriate circuit, even on a crowded fuseboard.
FD500 Technical Specification
Instruction Manual
| PROFESSIONAL FUSE FINDER KIT - FD600 - £89.00 |
The transmitter in the Professional Fuse Finder Kit (FD600) has an IEC socket with
a standard UK 3 pin mains adaptor, which extends the use to include both 13A sockets, and with the TL83 lead, to light fittings or other points in a circuit where there is no power socket.
Instruction Manual
