Drummond Test Lamp complies with GS38


Home	Products	Hints,Tips & FAQs	Calibration	Instruction Manuals	Technical Specs	Contact Us	News

Drummond

The Drummond range of test lamps all offer exceptional build quality and performance. Drummond lamps are widely specified by electrical utilities and other large, safety conscious organisations.

Please note special terms apply to Metrohm, Drummond
and “other” products.

MTL7 MTL7 Test Lamp
MTL9c MTL9c Test Lamp

MTL7 TEST LAMP - £29.00

The classic John Drummond test lamp is fuse protected and complies with GS38. This makes it ideal for low cost voltage testing.

The lamp gives clear positive indication of the presence of voltage and is not sensitive to the presence of low voltage interference.

Use of a Proving Unit is recommended, see Martindale PD690

Instruction manual

back to the top

Classic Drummond Test Lamp incorporates a continuity tester

MTL9c TEST LAMP - £49.00

The 9C incorporates a continuity tester attached to the test lead. This allows rapid convenient proof of the continuity of the test level circuit, showing that neither bulb nor fuses have blown.

The MTL9c has an LED built into the lamp body, to show voltage presence even when the bulb filament has failed.

Test lamps should always be proved safe both before and after use. This can be done by testing on a known live circuit, using the continuity tester or through the recommended proving unit.

See Martindale PD690

Instruction manual